DWC 3.1.1 - When Running Macro, Text box doesn't appear

JPRacer

Weird title, sorry - I've just updated to DWC 3.1.1, when I run a macro, which worked in previous versions, I only get the "ok" and not the message. Interestingly, I see the text on the PanelDue..

When running something like this: M291 P"Click OK to heat and unload filament" S3

This is what I get in DWC:

Screen Shot 2020-05-28 at 6.34.11 PM.png

and this is what I get on the PanelDue:

I've rolled back and that works, I'm just not sure what is going on in 3.1.1? I'm sure it's just something I'm missing...

Any help appreciated,
JP

Phaedrux

Are you using DWC 3.1.1 and firmware 2.05.1? If so, this has been reported as an issue between the two and M291

JPRacer

@Phaedrux

Ah, yes... I've been putting off the jump to firmware V3, as everything is working so smoothly now (isn't that how it goes!). I guess I need to make the leap eventually anyway.

thanks for this, I thought I was losing my mind!

r,
JP