Help 3d touch con fw version 3.01-RC5

Leblond

@DIY-O-Sphere said in Help 3d touch con fw version 3.01-RC5:

M950 S0 C "exp.heater3"

niente da fare, il piatto scende di 5mm e si ferma dandomi questo errore Error: in file macro line 9: G30: Z probe 0 not found

Leblond

m307 rimosso ma niet

Phaedrux

M558 P9 X165 Y165 Z1 H3 F200 T4000 ;M558 P5 C"!zprobe.in" H5 F250 T9000  <-- sensore induttivo          ; set Z probe type to unmodulated and the dive height + speeds
G31 P500 X-37 Y0 Z1.57                          ; set Z probe trigger value, offset and trigger height

Change to:

M558 P9 H5 F60 T4000 
G31 P25 X-37 Y0 Z1.57                          ; set Z probe trigger value, offset and trigger height

and try again

Leblond

@Phaedrux said in Help 3d touch con fw version 3.01-RC5:

G31 P25 X-37 Y0 Z1.57

niet

Leblond

Leblond

questo e' il collegamento che ho fatto

DIY-O-Sphere

@Phaedrux said in Help 3d touch con fw version 3.01-RC5:

M558 P9 H5 F60 T4000
@Leblond

Z-probe in is missing
Try
M558 P9 C"^zprobe.in" H5 F60 T4000

Phaedrux

@DIY-O-Sphere of course!

Leblond

non solo tu hai sbagliato pure io, non me ne sono accorto

Leblond

@DIY-O-Sphere said in Help 3d touch con fw version 3.01-RC5:

M558 P9 C"^zprobe.in" H5 F60 T4000

yesssss

Leblond

grazie ragazzi Risolto