Cannot connect Duet Wifi to new Wifi Router

A Former User

@GaRv3 said in Cannot connect Duet Wifi to new Wifi Router:

with full signal strength.

what it transmits and what it receives could differ by a lot tbh.

GaRv3

Yeah, but to be honest, this should really not be a thing.
The physical distance between the router and the Duet is maybe 0.5m. It's literally just this one wall in between.

I will actually try to remove the special chars from the wifi SSID and password now to see if this could be a thing.

Edit: No success

A Former User

All I'm saying is the Duet people are normally more than willing to replace faulty boards, but I'd hate to see you waste time with a replacement if the problem isn't the board; which I don't think is the case but thats just my $0.02.

GaRv3

I don't think it is a hardware problem with the board. This would be a strange coincidence cause it worked until I changed the router.

I will power up my old router now an check if the Duet connects to it.

Edit:
Connecting to the old router works just fine.
This has to be some kind of incompatibility...

A Former User

@GaRv3 said in Cannot connect Duet Wifi to new Wifi Router:

Connecting to the old router works just fine.

samme ssid and key?

bondus

I used to work with wifi routers a few years back and spent countless hours staring at sniffed packet logs to figure out why things did not connect.

Some things are simply not compatible with each other. It has nothing to do with radio quality, just that one of the parts involved has interpreted the standard in a different way. If it's a ISP provided router it will be the lowest bidder that has interpreted the standard...

GaRv3

@bearer
Tried same SSID and PW on the new one. Yes

GaRv3

@bondus
This is so frustrating. What is the use of standards if no one sticks to them?

Danal

A Former User

@GaRv3 said in Cannot connect Duet Wifi to new Wifi Router:

What is the use of standards if no one sticks to them?

see if the new one has some ultra mega max 2000 multimedia streaming extensions and try fixing the channel width to 20mhz and setting bgn mode to a lower common denominator, apart from that sounds like you might be better off briding the Duet to the old router?

droftarts

@GaRv3 Did you check/update the firmware on the router? Also, what router is it?

Ian

GaRv3

It's a so called "Vodafone Station".
To be precise it is the ARRIS Touchstone TG3442DE.

The firmware gets updated by the ISP automatically.

GaRv3

@bearer said in Cannot connect Duet Wifi to new Wifi Router:

see if the new one has some ultra mega max 2000 multimedia streaming extensions and try fixing the channel width to 20mhz and setting bgn mode to a lower common denominator, apart from that sounds like you might be better off briding the Duet to the old router?

Limiting to 20 MHz didn't make any difference.
The mode cannot be changed to anything but "Mixed 802.11 g/n" for the 2.4 GHz wifi on this router.

Edit: I cannot use the old router as an access point because I have to send it back to the ISP soon.

A Former User

I'm afraid I'm running out of suggestions; if running the Duet as an AP and your AP as a client* isn't a workable option (which sounds unlikely if its an ISP device).

*) in addition to the regular AP

GaRv3

@bearer
That's not possible with this router.
So my only option is probably to buy an M.2 wifi module for the PC and use this to connect to the Duet run in AP mode. But first I would like to double check if the module is compatible to the Duet.

I would probably pick the Intel 9260NGW which is a Wifi 2.4/5Ghz + Wifi 6 + BT 5.0 chipset. Any experience with this chipset connecting to the Duet AP?

droftarts

@GaRv3 said in Cannot connect Duet Wifi to new Wifi Router:

I would probably pick the Intel 9260NGW which is a Wifi 2.4/5Ghz + Wifi 6 + BT 5.0 chipset. Any experience with this chipset connecting to the Duet AP?

As it's the Duet setting the network, I'd guess almost any wireless adapter would work. We don't keep track of hardware that works, you're better off looking at more general 'works with ESP8266' pages.

Also found this, which sounds similar to the problem you're having: https://github.com/esp8266/Arduino/issues/4257
Might be useful for @dc42 to look at?

Ian

Sparatutto created this issue in esp8266/Arduino

closed v2.4.0 - wifi.status() and wifi.localIP not updated after a reconnect. #4257

GaRv3

@droftarts
Yes, actually seems like something @dc42 might be able to fix. I think I will try the wifi module in the meantime anyway.

A Former User

@droftarts said in Cannot connect Duet Wifi to new Wifi Router:

Also found this, which sounds similar to the problem you're having: https://github.com/esp8266/Arduino/issues/4257

if related, setting a static IP in the duet may help

M552 S-1
M552 S0
M588 S"*" 
M587 S"GarMir" P"key" I"192.168.0.37"
M552 S1 P"GarMir"

although bad mojo to set a static address inside a dhcp pool without at least making a reservation.

droftarts

@GaRv3 Please do try @bearer 's suggestion of setting a static ip address, too.

Ian

GaRv3

Already tried that. And I reserved the IP on the router as well to make sure it is free.