Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Dual PSU question.

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    3
    134
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Dkosundefined
      Dkos
      last edited by

      Hello people,

      I am currently running my printer with a chinese PSU (300w) that came with my first printer kit. Although it is currently working fine (for almost 2 years now), a bit noisy but fine, i was considering of removing some load from it. I have an ATX PSU laying around from a small factor HP PC i had. It is 250w and my though is to use this ATX psu for my Duet, and the led-type PSU for the heatbed (everything is currently running at 12v).

      My question is: Does it matter which one I use for the main (Duet) PSU and which one for the bed? And if i use the ATX as a main PSU should i still use a load resistor just for it to turn on?

      Thanks in advance!

      1 Reply Last reply Reply Quote 0
      • Danalundefined
        Danal
        last edited by

        Doesn't really matter which is which, as long as the wattage for the bed is within each.

        Yes to the resistor.

        Just curious: Duet 2 or 3?

        Delta / Kossel printer fanatic

        1 Reply Last reply Reply Quote 0
        • Dkosundefined
          Dkos
          last edited by

          Thanks for the reply!

          I did the configuration everything works fine, thanks!

          As for the board is a Duet 2 Wifi board.

          Cheers!

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA