Pressure Advance seems to not be working.
-
I haven't, no. I'm about to start printing things with PA of 0.5 to see how it is, ill bring my retraction back up a little bit to 3mm and see how I go from there. I will pick PA testing back up when I convert over to Direct Drive I think, I hate having bowden in the setup, I would much rather sacrifice some speed for quality.
Its still bugging me seeing the extrusion just straight up fail with those PA values I were testing with, I feel like its just a single setting that is hurting my experiments but i'm unsure what it is.
I really enjoyed my time using the Wilson 2's, but I'm so over the sketchup design and the way it performs its probing. I'm all for CoreXY now since joining in with Voron 2.
-
I have completely disabled PA after switching to KISS with it's looping seam hiding. When going to Hemera, I also disabled KISS' PreloadVE settings which is like slicer based PA to my understanding (but working of an experimentally deduced viscosity model of the material used).
Supermerill's Slic3r++ fork includes looping seam hiding as well, but I haven't tried it yet (the latest build crashes at launch and I haven't tried to figure out why).
-
@oliof said in Pressure Advance seems to not be working.:
Supermerill's Slic3r++ fork includes looping seam hiding as well, but I haven't tried it yet (the latest build crashes at launch and I haven't tried to figure out why).
He has a fix on the releases page. "You have to remove creality.ini and basic.ini from resources/profiles because they have duplicate lines."
I also need to try it.
