Duet 6hc config internet
-
Hi,
I would like to configure my Duet 3 6H to my internet network and I do not find the procedure to well configure?
Thanks
Chris
-
Are you connecting via a raspberry pi?
-
No connecting via raspberry!
I must absolutely use raspberry?
Thanks
-
@tech you don't have to, although in the long term I recommend it as over time the features using an SBC will grow.
If you don't want to use a raspberry pi or other SBC then you can set it up I. The same.manner as a duet 2 Ethernet. Note that the SD card that came with it is imaged for a Raspberry Pi.
-
Internet access to any 3D printer is a security risk. Therefore, it MUST be set up through something that is secure, such as a reverse proxy with authentication. This is not a simple topic.
It requires changes on your Router, and a machine that is always powered on to run the proxy, like a Raspberry Pi or a Windows machine, or a Linux machine.
Once you have your printer on your internal network, and at a fixed IP address, try something like this if you want to use a Raspberry Pi:
Or this if you prefer to run the proxy on a Windows machine:
-
-
@Danal, Hi Dana, thank you for the information I will watch this!
-
@T3P3Tony said in Duet 6hc config internet:
@tech you don't have to, although in the long term I recommend it as over time the features using an SBC will grow.
If you don't want to use a raspberry pi or other SBC then you can set it up I. The same.manner as a duet 2 Ethernet. Note that the SD card that came with it is imaged for a Raspberry Pi.
were the initial batch supposed to come with a populated SD card ? as i know mine DIDNT!!!
-
@tech said in Duet 6hc config internet:
@T3P3Tony, so I can use the same configuration as for a Duet2!?
for the network yeah, there are however a few differences for the rest of the config, covered in the wiki
-
@CaLviNx said in Duet 6hc config internet:
@T3P3Tony said in Duet 6hc config internet:
@tech you don't have to, although in the long term I recommend it as over time the features using an SBC will grow.
If you don't want to use a raspberry pi or other SBC then you can set it up I. The same.manner as a duet 2 Ethernet. Note that the SD card that came with it is imaged for a Raspberry Pi.
were the initial batch supposed to come with a populated SD card ? as i know mine DIDNT!!!
I have one of the very first of the first batch, and it did not come with a card at all.
No biggie. Follow the instructions to download and write an image to a card. On a decent internet link, maybe adds 10 or 20 min to the whole process.
-
@Danal said in Duet 6hc config internet:
No biggie. Follow the instructions to download and write an image to a card. On a decent internet link, maybe adds 10 or 20 min to the whole process.
I'm lost, so please excuse my ignorance... Where did I say I needed ANY assistance in getting my Duet 3 up and running?
I must be mistaken as I thought that I only asked if the first batch came with an SD card or not!!!!!
-
I humbly beg your indulgence for providing a data point relevant to your question via my own experience, and then providing some extra information. I will endeavor not to do that in the future.
-
@Danal said in Duet 6hc config internet:
I humbly beg your indulgence for providing a data point relevant to your question via my own experience, and then providing some extra information. I will endeavor not to do that in the future.
There is over answering and there is hitting it out of the park.....
