Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Cannot get DWC to load

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    3
    5
    248
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • preb1undefined
      preb1
      last edited by

      Hi.
      I have not used my printers for a while but went touse them last night and I cannot get the DWC to load. The only change since I used the printers last time is I have a new router and provider but the network I use in my garage is still the same and works fine. The printers connect to the network but I cant get the DWC to load. I connected YAT to check the details andd I got the following.
      M552 S1
      <LF>WiFi module is connected to access point Wireless-N, IP address 192.168.0.24
      If I ran M587 I got a the same remenbered network but different IP address of 192.168.0.14.
      I thought it best to get rid of the remembered network so ran M588 S"*" and got rid of all networks. Ran 587 S"SSID" P"password".
      M552 S1 and I am connected to Wireless-N IP192.168.0.24 etc.
      So this is where I am getting stuck. Printer is connected to network.
      I type the IP address 192.168.0.24 and I get "Your Duet rejected the HTTP request: page not found
      Check that the SD card is mounted and has the correct files in its /www folder"
      I dont know where to go from here. Nothing else has changed.
      Any help please?
      Best regards
      Paul

      T3P3Tonyundefined 1 Reply Last reply Reply Quote 0
      • T3P3Tonyundefined
        T3P3Tony administrators @preb1
        last edited by

        @preb1 what results do you get for M122 in the SD section?

        www.duet3d.com

        1 Reply Last reply Reply Quote 0
        • Danalundefined
          Danal
          last edited by

          Power off and remove the SD. Put the sd in a windows machine. Do a dir on that drive (or just open windows file explorer and do a screen shot when it is showing that drive) and post results here. Then do a dir \www and post those as well.

          Somehow/somewhere your sd either lost or corrupted the directory where DWC lives. We can fix that!

          Delta / Kossel printer fanatic

          1 Reply Last reply Reply Quote 0
          • preb1undefined
            preb1
            last edited by

            Thanks for the replies guys but rather embarassingly it is now working ok. I feel such an idiot. I don't know why all of sudden it works fine. The only difference is that I didn't have the usb cable connected to machine or YAT terminal open.
            Would that prevent the DWC from opening?
            Anyway at the moment I am back printing.
            Thanks again for your replies. Always nice too know there is someone there to help.
            Cheers
            Paul

            Danalundefined 1 Reply Last reply Reply Quote 0
            • Danalundefined
              Danal @preb1
              last edited by

              @preb1 Nah, USB serial shouldn't hurt anything.

              That SD card may be going flakey. I'd copy it to a new, freshly formatted, card.

              Delta / Kossel printer fanatic

              1 Reply Last reply Reply Quote 0
              • First post
                Last post
              Unless otherwise noted, all forum content is licensed under CC-BY-SA