Duet2 wifi mac address

dmtulsa

I know it states "The default MAC address on a Duet 2 Ethernet is generated from the unique processor ID so there is normally no need to change it." But I need the mac address to set up a static rout in my router. I've used wifi sniffers but none see the printer. How should I go about getting the mac address?

Thank you
Doug

Veti

normally the router has a page that shows a list of dynamic ip addresses assigned by dhcp. there normally the mac address is listed.
or look for an entry for arp routing table in the router.

A Former User

@dmtulsa said in Duet2 wifi mac address:

How should I go about getting the mac address?

i believe its part of the output from M122 on a duet wifi, but as stated its usually listed in the router somewhere, or even on your local computer by displaying the arp table. (arp -aon windows command line)

droftarts

Yes, M122 shows it in the Network section:

=== Network ===
Slowest loop: 15.41ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address 5c:cf:7f:1a:9c:3b
WiFi Vcc 3.34, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 24992
WiFi IP address 192.168.0.4
WiFi signal strength -64dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0

Ian

dmtulsa

Okay thank you all very much, that did it.
Doug