Fan1 dont show

TPJensen

And you can also run the PID tuning with the fans running at your regular print speed so that the model can account for the extra cooling of the block

Okay what is PID tunning and how is this done ?

Phaedrux

https://duet3d.dozuki.com/Wiki/Tuning_the_heater_temperature_control

https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+4:+Calibration/40#s161

Phaedrux

I think I made a mistake with the tool definition I provided above.

M563 P0:2 D0 H1 ; Define tool 0 is incorrect.

I should have said M563 P0 D0 H1 F0:2 ; Define tool 0

TPJensen

@phaedrux said in Fan1 dont show:

I think I made a mistake with the tool definition I provided above.

M563 P0:2 D0 H1 ; Define tool 0 is incorrect.

I should have said M563 P0 D0 H1 F0:2 ; Define tool 0

hehe okay I was just about to write that it did not work, I wil try that setting when then print is done

TPJensen

@phaedrux said in Fan1 dont show:

M563 P0 D0 H1 F0:2 ; Define tool 0

YES!!! it works now thank you so much