Cant Get Board Setup PLEase HELPPP!!!
-
Please help me and contact me at Brandon019349@gmail.com. I have gotten everything set up I believe but when i try to get on to the web controller it says "Check that the SD card is mounted and has the correct files in its /www folder"
-
your board should have come with an sd card that has the correct structure.
see this to set it up manually
https://duet3d.dozuki.com/Wiki/Firmware_Overview#Section_SD_card_structure -
The problem is that I dont know how to set any of this up. I bought this off someone and they didnt give me any of the information on how to use it. Never used a Duet controller before and it doesnt have the LCD panel anymore either
-
I have followed the directions to set it up so many times and still cant get it to work.
-
@brandon019349 said in Cant Get Board Setup PLEase HELPPP!!!:
I have followed the directions to set it up so many times and still cant get it to work.
Are you able to mount the SD card on your computer and insure the correct files are in place?
Frederick
-
post a directory listing of all files and folders on the sd card
-
How do I do that?
-
assuming that you are using windows something like this
https://smallbusiness.chron.com/list-files-hard-drive-53547.html -
im using Macbook
-
-
it looks like the DWC was updated to some 2.0 beta version.
save the /www folder and replace it with the content of
DuetWebControl.zip
from
https://github.com/dc42/RepRapFirmware/releases/tag/2.03 -
So the 1.2.2 version one?
-
Does everything else seem to be in order for everything to work. Not sure how to set up by BLtouch either
-
and also where do i go from here to get everything started up?
-
I got the web controller up but now it wont home Z
-
Its like it doesnt know the bed is there and i dont know how to make it use the bltouch instead of the head
-
why dont you start by telling us what printer you have. what its currently running.
there are step by step guides on how to set up a duet.
for example here is one for the ender 3
https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+1:+Wiring/37 -
I have an ender 3 but the guy that i got it from added lots of stuff like the bl touch
-
There isnt really a guide for Ender 3 with bl touch Duet 2 Maestro and micro swiss hotend.
-
@brandon019349
ender 3 and ender 3 pro are close enough.then you go on to set up the bltouch using this helpful page
https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probeand the micro swiss hotend might just be a different thermistor.
