Cant Get Board Setup PLEase HELPPP!!!
-
assuming that you are using windows something like this
https://smallbusiness.chron.com/list-files-hard-drive-53547.html -
im using Macbook
-
-
it looks like the DWC was updated to some 2.0 beta version.
save the /www folder and replace it with the content of
DuetWebControl.zip
from
https://github.com/dc42/RepRapFirmware/releases/tag/2.03 -
So the 1.2.2 version one?
-
Does everything else seem to be in order for everything to work. Not sure how to set up by BLtouch either
-
and also where do i go from here to get everything started up?
-
I got the web controller up but now it wont home Z
-
Its like it doesnt know the bed is there and i dont know how to make it use the bltouch instead of the head
-
why dont you start by telling us what printer you have. what its currently running.
there are step by step guides on how to set up a duet.
for example here is one for the ender 3
https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+1:+Wiring/37 -
I have an ender 3 but the guy that i got it from added lots of stuff like the bl touch
-
There isnt really a guide for Ender 3 with bl touch Duet 2 Maestro and micro swiss hotend.
-
@brandon019349
ender 3 and ender 3 pro are close enough.then you go on to set up the bltouch using this helpful page
https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probeand the micro swiss hotend might just be a different thermistor.
-
@veti said in Cant Get Board Setup PLEase HELPPP!!!:
This is the issue Im having. I dont understand any of this stuff so i don't understand half the stuff they are saying to set it up. Thats why i need help
-
As @Veti has said start with the manuals that Phaedrux has written, they are a godsend.
I can give you my config for the BL Touch.
As it says the Microswiss is a hot end, it only heats.
Just need to know which thermistor is in it.I can drop my Maestro code before I put the DD Extruder on it, but not until later.
P.
-
I have gotten to the web controller and have read all manuals I can find and still don't understand how to get this to work. I feel stupid that I don't understand this stuff but I dont and need more guidance than words on a manual that doesnt go into depth at all
-
Brandon. 3d printing is not something that just works. you will need to invest a lot of time in it.
there are many people start of like you. there are a lot of guides written and made on youtube.so please invest the time. read the guide. then come back with a list of things that you do not understand and ask them here.
we will try and help you understand them. but a general "i dont understand half of it" is not helpful because we dont know which half you dont understand.setting up a printer is just a start. you will need to test out a lot of different settings to get a good print quality. this takes time and involves reading and learning every step of the way.
-
@veti said in Cant Get Board Setup PLEase HELPPP!!!:
Brandon. 3d printing is not something that just works. you will need to invest a lot of time in it.
there are many people start of like you. there are a lot of guides written and made on youtube.so please invest the time. read the guide. then come back with a list of things that you do not understand and ask them here.
we will try and help you understand them. but a general "i dont understand half of it" is not helpful because we dont know which half you dont understand.setting up a printer is just a start. you will need to test out a lot of different settings to get a good print quality. this takes time and involves reading and learning every step of the way.
+1 on this
-
Where are you based?
Is your config.g as you posted earlier?
Also a please post your config-overide, again if it is as above then fine.I will go through and make sure the base settings are OK, to help.
-
Ok I think I have everything else set up the only thing that I need to figure out is why my extruder doesn't go to the center of the bed to home the Z axis. I dont think i have any configuration files for the bl touch either. I'm not sure how to get those because everything that I have seen has been for different machines and not with a maestro.
