Non planar layers
-
@dc42... Do you think this can be implemented in Duet?
These movement, requires especial slicer and firmware?
-
@peirof said in Non planar layers:
@dc42... Do you think this can be implemented in Duet?
These movement, requires especial slicer and firmware?
It only needs special slicer. No changes in firmware needed
-
And that's what is exciting about it, as vs. prior efforts: It is available in a "mainstream" slicer.
-
I have found another video/guide
-
Before everyone gets the underwear too messed up with excitement...
There is a possible issue of this already having being patented by another company which might stop it being used freely............
-
@calvinx what company?
-
Cant remember, i will try to find the article again, i read it last night on one of the 3d printing blogs.
-
and how different is this than a hexapod with 5 axis?
sounds like someone is trying to patent the ESC key again
-
@calvinx said in Non planar layers:
There is a possible issue of this already having being patented by another company which might stop it being used freely............
Are you sure this will stop us for non commercial use?
-
@fma I had the same idea, and a question: how about building a DIY 3D printer with patented technology and then printing and selling 3D printed parts in a shop. Is this allowed?
-
Good question ; I don't know...
-
-
@calvinx broken link?
-
No, the link works fine...
-
@peirof works for me
-
I am not a lawyer, but I looked into the patend and saw it was abandoned in 2015, and there is an article https://smallbusiness.chron.com/patents-abandoned-65186.html explaining when a patent was abandoned, it can be used. A commecial produced product between abondent and new status active needs not to pay fees.
But as I said, I have little patent knowledge. -
@joergs5
good info but strange that the patent was only applied for in 2015 by auto desk.further investigation is required I think.
-
But AFAIK, a patent only prevents commercial use of something; I don't think it forbids someone to develop free sofware for personal use...
But I don't know if it is a problem for a university. It could also be a problem if Prusa Research implements something patented in their Slic3r fork...
-
This post is deleted! -
I don't know the status of the Autodesk patent, but there is at least some prior art in 3D printing:
Some other prior art to the March 2015 Autodesk patent, specifically 3D printing:
April 2013 - https://www.thingiverse.com/thing:75735
July 2016 - Hackaday article https://hackaday.com/2016/07/27/3d-printering-non-planar-layer-fdm/
Nov 2014 - Comment in Hackaday article https://hackaday.com/2016/07/27/3d-printering-non-planar-layer-fdm/#comment-3105340 leads to https://github.com/nick-parker/Bread first commit in github was Nov 2014.Ian
