Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Changing input voltage used

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    3
    4
    259
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • vhowardundefined
      vhoward
      last edited by

      Hi. I have been using my Duet for a while now and started with a 12v power supply. Now I want to change to a 24 volt supply. So I have purchased a 24v 350watt Meanwell, a 24 volt hot end heater cartridge and some 24 volt cooling fans. My heatbed is mains powered and controlled via ssr. My question is since I am supplying 24 volts now, do I need to change the motor current for the steppers?

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by Phaedrux

        Short answer: No you do not.

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • Vetiundefined
          Veti
          last edited by

          you will need to pid tune the hotend again as there is a parameter for the voltage. but you needed to to that anyway because of the new heater catridge and changed fans.

          1 Reply Last reply Reply Quote 2
          • vhowardundefined
            vhoward
            last edited by

            Thanks guys. That was what I was thinking. Was planning on doing the pid tune again. Just wanted to make sure.

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA