Duet Ethernet config running on a Duet Maestro

[singhm29]

Hey,

A community member was kind enough to provide his Duet Ethernet files that he used with his setup but unfortunately, I have a Maestro. Would I need to adjust many of the files found in the sys directory to get it running on the Maestro such as pin assignments etc? I recognize that certain features like stall detection that he might have enabled will not work for the Maestro.

Thanks!

[Veti]

max current for the stepper is lower.
the resistor for thermistors is 2200 instead of 4700 (just delete the R part completly)
the maestro supports stealthchop2, so you might want to tune those settings.

[singhm29]

Thanks for the insights!