Veti,

Copy & paste into Amazon search field: B06XCZC89W

I did not buy from this particular vendor, as the vendor I did buy from was via eBay and that vendor has disappeared. However, this vendor seems to be selling exactly the same product that I purchased through eBay. I can not vouch for this vendor but his product appears to be the same exact product. The case is same, the ferrules the same count and color and has same crimper.

The 'bootlace ferrule' crimper tool is Nr: HSC8 6-4, which is the same as that marked on my crimper!

My crimper works perfectly. I haven't tracked down the wire issue yet on my delta printer, but its on today's do-list. I am satisfied with the ferrule crimper's functionality, it works finely. Things happen.

To afford easier crimper usability, I replaced the Phillips cross-point ferrule size 'adjustment 'setting' screw with a 3/4" (0,75inch/19mm) long pan head screw, so that its easy to remove without having to resort to using a screw driver to change ferrule size. Screw in/out by forefinger & thumb, etc, eg, loose.

Hope this helps

3mm