BL Touch verification and questions
-
Okay, so I'm moving on to the BL Touch and can I get another verification for this please? I'm also wondering about
- exactly how to set up the board on the configuring software,
- I'm seeing something about de-soldering a pad to make it 3.3V compatible for this board. Is that necessary? It's a new BL Touch, so I"m wondering if that's been "fixed"
- Is there anything else I should be aware of or take caution of before firing up the board again?
Thank you!
-
What version of the BLTouch is it?
What version of Duet2Wifi is it?Newer versions won't require you to cut the 3.3v trace.
https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probe#Section_BLTouch
https://duet3d.dozuki.com/Wiki/BLTouch_Troubleshooting
https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe -
I bought the BL Touch and DuetWifi within the last month or so, so is it safe to assume it's okay as is? I have re-wired the connector going to the Duet,
-
That looks like version 1.04b so you're ok with not cutting the 3.3v trace.