Survey: Usage of a 3D-Printer

taconite

Hello guys,

first of all I would like to thank you all for being always super helpful.
Today I have a different kind of need.
At the moment I am writing my master thesis about the ongoing development of a 3D-Printer. Therefore I would like to further understand the requirements of users of 3D-Printers.

I put together a little survey, which takes about 10 minutes to fill out. I would be super grateful, if some of you would take the time to fill it out.

The survey is anonymous and the results can't be traced back to an individual person. The data gained from the survey will be treated confidentially and won't be passed on to a third party.

If you have any questions just post here or contact me through my e-mail-address provided in the survey

The survey can be found here:
https://www.umfrageonline.com/s/ca97cc1

Thank you for your time!

Best whishes,
Adrian

taconite

Do you guys find the survey/questions clear?

Thanks to the 13 people who already participated!

timcurtis67

Yeah I thought it was pretty straight forward.

A Former User

I might be wrong but after having a look through the survey the cynic in me feels it's more of a company getting market research data than anything else....

taconite

@calvinx I can assure you that there is no one behind me that gets the data - just me. And as I said no third party will get the data or any conclusions derived from the data.
Of course its a market research but I need it for my thesis

deckingman

@taconite I filled out your survey which is something I very rarley do. Just a suggestion - I'm working something that will take 6 filaments but the maximum choice in your survey is 5. I made a comment to that effect at the end.

taconite

@deckingman Thank you for your participation. Good point, I will change that in the survey

PuterPro

@taconite - Taken.

Didn't see the "keep this code" until I had already clicked "Finish". Don't know what you had in mind there, but you need to make it more prominent if it's really needed.

Good luck on your thesis!

taconite

@puterpro Thank you for your participation and your feedback. I am afraid I can't change that because that's the setting of the survey provider (umfrageonline.com).

Thank you

chas2706

@taconite I did your survey last night.
Seemed pretty straight forward, no issues for me.

PuterPro

@taconite YW!