-
4th Axis rotary A
I have just upgraded my controller board to the Duet2 and installed a 4th rotary axis -A
I’m looking for advise on which is the recommended post processor to use for the 4th axis.
I currently use Ventric Aspire v8.5 but can’t find any suitable post processor for wrapping
My router is a CBeam x/l which is similar to the Workbee by open builds.
For X,Y&Z milling the basic . Gcode post processor seems to work ok with the Duet2
I would appreciate some help with my pp issuePhil T
-
Autodesk Fusion 360 will do 4th axis work. It's free (with limits) and tons of tutorials on it.
-
Many thanks for advise..
I've down loaded Fusion 360...
Now to trawl through the training vids