Anybody mind if I add "off" to the tool/bed heater toggles?
-
Right now the toggle buttons for the tools/bed heater only cycle between active and standby. Would anyone have heartburn if I added "off" to the mix so the cycle would be off->active->standby.
-
@gtj0 I think that would be helpful if you use a standby temperature and thus want a third option of off.
-
@t3p3tony Yeah it will also mirror the DWC this way.
I'm trying to get to the point where I only need the DWC for admin tasks like uploading new firmware or editing configs or macros.
-
Pull request sent to @dc42
