combining outputs on expansion board results in unknown pin

[kingofthegeeks]

3.6.2 beta 2

I'm converting a Stratasys Dimension to Duet and recently picked up an expansion board so i can wire everything the way i want. Previously i used the following for the chamber heater:

M950 H3 C"out7+out8" T5

Expansion board connects fine, temp sensors work properly and each heater works independently:

M950 H3 C"1.out0" T5

M950 H3 C"1.out1" T5

but the following:

M950 H3 C"1.out0+1.out1" T5

Does not work and results in the following error:

Error in start-up file macro line 66: Unknown pin name '1.out1'

is there something I'm missing ?

config.g

[jay_s_uk]

@kingofthegeeks IIRC it should just be

M950 H3 C"1.out0+out1" T5

Notice the lack of the second 1.

[kingofthegeeks]

@jay_s_uk Thank you !

That's simple enough it seems like i should have tried it, I'm grateful for your quick response sir !