New DuetPi Bookworm builds featuring v3.5.3 now available
-
I'm pleased to announce new 32-bit and 64-bit builds of our DuetPi image for SBC mode featuring software version 3.5.3. These builds are available from here if you wish to download them directly from GitHub. Alternatively, use the official Raspberry Pi Imager utility and install them directly via
Choose OS
->Other specific-purpose OS
->3D printing
->DuetPi
.It's highly recommended to use these new builds for new setups, especially if you want to set up a a Duet with the Raspberry Pi 5. Previous DuetPi versions contained a work-around for the RPi5 which adjusted the pin numbers for that particular board on first boot, however that work-around has become obsolete, and further system upgrades via
apt
are likely to cause problems (however not if upgrading DSF only viaM997 S2
, see also DSF 3.5.3 upgrade notes).If you are still using an old Buster-based DuetPi build, I highly recommend checking out our Debian Buster to Bookworm migration guide. Debian Buster is no longer maintained.
In case you encounter issues with these builds, feel free to open a new thread with
[DuetPi 3.5.3]
in the title. -