Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Error: M916: no resume file found

    Scheduled Pinned Locked Moved
    Duet Web Control
    2
    3
    96
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Ironman777undefined
      Ironman777
      last edited by

      Any advice on- Error: M916: no resume file found. I have resurrect-prologue.g setup. 24V power supply with 10000 uf capacitor on VIN.

      droftartsundefined 1 Reply Last reply Reply Quote 0
      • droftartsundefined
        droftarts administrators @Ironman777
        last edited by

        @Ironman777 See https://docs.duet3d.com/en/User_manual/Tuning/Resume

        If that doesn't help, please post your config.g, and send M122 in the DWC console and post the response. If you pause a print, is a sys/resurrect.g file created?

        Ian

        Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

        Ironman777undefined 1 Reply Last reply Reply Quote 0
        • Ironman777undefined
          Ironman777 @droftarts
          last edited by

          @droftarts so I was able to get the resume file to be created it just took some time for the capacitor to build a charge. Now the problem I have is with the offsets applied to make my print head square to the build plate the 0 position is off. When I press pause during a print it doesn’t return to limit switches it ends up coming up slightly short on X and Y.

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA