Accelerometer wiring on Duet2
-
Hi,
I just bought the Duet Accelerometer 0.2 for a Modix with a Wifi2.
The wiring guide here https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Duet3D_Accelerometer has pictures of the Duet 3
The guide mentions "Duet3D Accelerometer, using the LIS3DH, designed to plug into the SPI Daughterboard header on Duet 2 and 3 mainboards."
Is that the connector that is described here https://docs.duet3d.com/duet_boards/duet_2_wifi_ethernet_maestro/duet2ndgen_connections_v1.0-1.5_d2.1.png as the "temp daughterboard"? and I directly plug it in or do I need another daughterboard for the accelerometer as well?
Cheers
F. -
@sungod3k said in Accelerometer wiring on Duet2:
Is that the connector that is described ... as the "temp daughterboard"? and I directly plug it in?
Yes, that's correct. See this thread for an example of an accelerometer plugged in. Also that thread has identified an issue if you have a PanelDue plugged in using both cable; if possible just use one. https://forum.duet3d.com/post/338543
Ian
-
@droftarts great, thanks for the pic, very handy!
