Can you remove the 'RETRACT' button?
-
Hello everyone.
I have a large format pellet extruder installed on my printer, and I just had an incident where I accidentally pressed the 'Retract' button in DWC instead of the 'Extrude' button.
I didn't realize immediately, so it brought molten material to rise up into the cooled zone of the barrel and solidify, jamming the extruder.
I had to take the extruder apart to clear the jam, so to avoid this happening again, is there a way for me to remove the 'Retract' button entirely from the DWC?
Looking forward to hear,
Søren
-
@sbNielsen you can turn all the feed amounts to 0mm, and then use the BtnCmd plugin and create your own feed buttons with no retract ones.
-
Outside of making a custom version of DWC to remove controls that you do not want accessible you could look into some third-party browser extensions that allows you to hide controls would be useful.
https://chromewebstore.google.com/detail/hide-that/kjheknompfelomdgfloikfbnjmaiflfe
https://chromewebstore.google.com/detail/click-to-remove-element/jcgpghgjhhahcefnfpbncdmhhddedhnkIf you use Chrome those may work for you.