Ouput from macros and commands not working
-
Using panel due when i type in g30s-1 or m115 (example commands) no output is written to the console tab on the display
On dwc output is logged/displayed.
I cannot find a configuration setting that controls this behavior
Paneldue firmware is 3.4.0
Board firmware is
FIRMWARE_NAME: RepRapFirmware for Duet 3 Mini 5+ FIRMWARE_VERSION: 3.5.1 ELECTRONICS: Duet 3 Mini5plus WiFi FIRMWARE_DATE: 2024-04-19 14:41:25It has been doing this before updating to 3.5.1
-
@thetazzbot said in Ouput from macros and commands not working:
Paneldue firmware is 3.4.0
Please update your firmware and see if you have the same issue. There is a new 3.5 release candidate for the PanelDue.
https://forum.duet3d.com/topic/35560/paneldue-firmware-3-5-0-rc9-released