Printer not logging to console
-
This post is deleted! -
@thetazzbot which console are you referring to? can you post an image of the issue
-
@thetazzbot I suspect the firmware on that particular board is <= 3.4 and you have two browser tabs of the machine on the same device open. RRF 3.4 and older (in standalone mode) can only store the G-code output once per IP address, so the second session will get no responses. RRF 3.5 does not suffer from this limitation.
-
@T3P3Tony console tab of the paneldue or even the browser
-
@chrishamm 3.4.5 i believe is the version and the console im referring to is on the paneldue
-
@thetazzbot do you get the busy idle messages in DWC in the browser?