Travel speed DWC controll?

Chriss

Hi *,

I can remember that one of the G/M commands controlled the default travel speed when I click on one of buttons, but I can not remember which command it is. Can somebody please give me a hind please?

Cheers, Chriss

soare0

How would the machine know, other G1 X123.0 Y345.0 E0.0 (for example) that a move is for travel or for print? I would love to know such a move, other that had it from slicer.
To circumvent this, I set travel as max printing speed, and then I play with speeds as I like, for experimenting during printing.
Of course, with the inherent drawbacks.

jay_s_uk

@Chriss they're in the settings section in DWC IIRC

droftarts

@Chriss In Settings > Machine-Specific > General > Machine-Specific (if that isn't confusing!)
See https://docs.duet3d.com/User_manual/Reference/Duet_Web_Control_Manual#general-tab-1

Machine-Specific - babystepping increment/decrement in mm, and feedrate in mm/min for all axes when pressing the move buttons on the Dashboard screen.

Ian

Chriss

@droftarts @jay_s_uk

Thanks guys... I found it there. I was under the impression that the setting was somewhere in the firmware and not in the DWC.

Cheers, Chriss