Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Assistance with resetting DUET2 from back up files request.

    Scheduled Pinned Locked Moved
    CNC
    3
    3
    88
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Feathertreecncundefined
      Feathertreecnc
      last edited by

      Hello peeps, newbie on the forum here!

      I have an Ooznest WorkBee with Duet2 WiFi attached.

      Whilst attempting to update my WorkBee firmware, I lost connection to the Duet - subsequently I now can't get WorkBee to run on my browser despite there being a wireless connection confirmed with DCHP address shown on YAT.

      I did do a back up before attempting to update the WorkBee stuff, but don't know how to wind the Duet back to with the back up data.

      Is anyone able to let me know how I can go about this please?

      I've been trawling around so many forums and websites looking for guidance on this and am getting close to being sectioned and spending time in a padded cell, so all or any assistance will be gratefully received.

      Any info needed to assist please ask - as I say, I'm a newbie on here, and to the Duet and WorkBee so am a relative novice.

      Many, many thanks in advance,

      Graham

      oliofundefined droftartsundefined 2 Replies Last reply Reply Quote 0
      • oliofundefined
        oliof @Feathertreecnc
        last edited by

        @Feathertreecnc best to take the SD card out of the duet2 wifi board and check it's contents on a computer. I suspect the /www directory and contents are listing. I seem to remember that Ooznest have their own version of Duet Web Control adjusted for CNC use a bit; maybe contact their support for a set of files?

        <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

        1 Reply Last reply Reply Quote 0
        • droftartsundefined
          droftarts administrators @Feathertreecnc
          last edited by

          @Feathertreecnc Most of the Workbee files, and a support forum specifically for Workbee, is hosted by Ooznest: https://learn.ooznest.co.uk/
          Firmware, configuration files and their version of DWC (Workbee Control) are here: https://learn.ooznest.co.uk/Wiki/WorkBee_Firmware_Releases

          If you can connect via YAT, send M115 and post the response, which will show what firmware version you are on, and you can then choose the appropriate files.

          I've moved this thread to the CNC category.

          Ian

          TronXY X5S with Duet 3 MB6HC and Roto toolboard : Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : Polargraph with Duet 2 WiFi

          1 Reply Last reply Reply Quote 0
          • droftartsundefined droftarts moved this topic from Duet Web Control
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA