Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    WIFI Disconnect Issue

    Scheduled Pinned Locked Moved
    General Discussion
    3
    3
    112
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Stoneflowerundefined
      Stoneflower
      last edited by

      Hello! I'm facing an issue with the duet board. It was working fine and got connected to the wifi. Suddenly it got disconnected and if I run the command
      M552 S-1
      M552 S0
      M552 S1 ;It does not start the wifi module. Only one message is shown on the console window - "connected". I tried using the M587 but the screen is still blank. I attached a picture of the screen. Is there anything wrong with my board?2.jpg 1.jpg

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by Phaedrux

        Can you connect to the board via USB terminal and send the same commands?
        Does it give an M122 report?
        What firmware version are you running?
        Which Duet board?

        Try working through this guide and see what you find works and doesn't work.

        https://docs.duet3d.com/en/User_manual/Troubleshooting/Duet_wont_respond

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • studiofielsundefined
          studiofiels
          last edited by

          This post is deleted!
          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA