Printer just stops
-
Hi All recently having my printer stop at irregular layers. The print starts without issues then suddenly just stops, no pause or cancel print and no means of resume. The bed and nozzle heater remain active and up to temperature. Its a duet2 maestro on firmware 3.4.5 after the fail I get this in the diagnostics :-
=== Platform === Last reset 00:00:29 ago, cause: software Last software reset at 2023-12-03 17:42, reason: HardFault unaligned, GCodes spinning, available RAM 20468, slot 2 Software reset code 0x4063 HFSR 0x40000000 CFSR 0x01000000 ICSR 0x00000803 BFAR 0xe000ed38 SP 0x200026c0 Task MAIN Freestk 992 ok
That I hope might help someone point me in the right direction.Lyndon
-
@lyndon Please post the full M122 output.