Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    SAMMYC21 ERCF

    Scheduled Pinned Locked Moved
    Hardware dev
    8
    25
    1.3k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • oliofundefined
      oliof @Th0mpy
      last edited by

      @Th0mpy it may be worth looking into https://reprap.org/forum/read.php?424,889788

      <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

      Th0mpyundefined OwenDundefined 2 Replies Last reply Reply Quote 0
      • Th0mpyundefined
        Th0mpy @oliof
        last edited by

        @oliof Good ole Forest Mimms, I had a few of his books from Radio Shack when I grew up.

        I will have to check this out, I was considering something like that but was leaning towards something already manufactured. This is cool!

        Usually the team that scores the most points wins the game.

        1 Reply Last reply Reply Quote 1
        • OwenDundefined
          OwenD @oliof
          last edited by

          @oliof
          That is cool.
          Have you integrated it on RRF?
          If so, can you detail it (in a new post)?

          Th0mpyundefined oliofundefined VoodooBaneundefined 3 Replies Last reply Reply Quote 0
          • Th0mpyundefined
            Th0mpy @OwenD
            last edited by

            @OwenD Of course! I plan to share what I have this weekend(ish). I'll post a new thread on the subject.

            Usually the team that scores the most points wins the game.

            1 Reply Last reply Reply Quote 0
            • oliofundefined
              oliof @OwenD
              last edited by

              @OwenD I have not built that myself, nor integrated into RRF. I am just reading that section of the venerable reprapforum and sometimes interesting stuff comes up.

              <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

              1 Reply Last reply Reply Quote 1
              • VoodooBaneundefined
                VoodooBane @OwenD
                last edited by

                @OwenD Did you make a new Post? I am soldering my own canned ercf board now. Can you share the firmware card you used?

                OwenDundefined 1 Reply Last reply Reply Quote 0
                • OwenDundefined
                  OwenD @VoodooBane
                  last edited by

                  @VoodooBane
                  I think you need to ask @Th0mpy
                  I'm just an onlooker

                  Th0mpyundefined 1 Reply Last reply Reply Quote 0
                  • VoodooBaneundefined
                    VoodooBane
                    last edited by

                    @Th0mpy

                    Hey thompy, Do you have any of the boards still? I would like one from you if you do

                    @Gixxerfast I sourced a bunch of the SMD components myself. However, it looks to be that some components are missing from your Excel document. I didn't think to look for whatever reason before buying components.

                    The components you did not include in the Excel sheet and what I am missing.
                    D1, D2
                    C3, C4, C6
                    R8, R11, R12, R13, R14, R15, R16, R17, R18, R19

                    I really hope I am not screwed...

                    See my screenshot.
                    canned.ercf.so.far.jpg
                    smd list.jpg

                    VoodooBaneundefined 1 Reply Last reply Reply Quote 0
                    • VoodooBaneundefined
                      VoodooBane @VoodooBane
                      last edited by

                      @VoodooBane I was actually able to find what the components where in Kicad.

                      Th0mpyundefined 1 Reply Last reply Reply Quote 0
                      • Th0mpyundefined
                        Th0mpy @VoodooBane
                        last edited by

                        @VoodooBane Hey there, sorry for the delay. I might have a couple left, let me know if you're still interested.

                        Usually the team that scores the most points wins the game.

                        1 Reply Last reply Reply Quote 0
                        • Th0mpyundefined
                          Th0mpy @OwenD
                          last edited by Th0mpy

                          @OwenD Haven't touched it in a hot minute, but as I recall that I had a custom firmware to handle the two steppers. Are you still looking for this?

                          EDIT: I found the firmware I used, it was the one originally from @Gixxerfast , you'll need to compile it: https://github.com/gixxerfast/Duet3Expansion/tree/cannedboard

                          Usually the team that scores the most points wins the game.

                          VoodooBaneundefined 1 Reply Last reply Reply Quote 0
                          • VoodooBaneundefined
                            VoodooBane @Th0mpy
                            last edited by

                            @Th0mpy
                            @Gixxerfast

                            I need to look at the settings, so I get emailed when someone responds; sorry about that.
                            I might be interested. I would like to see if I soldered correctly. (it is my first SMD DIY project)
                            But I would like another one since it is going on an Idex printer if I want to go super extreme, lol.

                            Do you know if @gixxer is planning to make a more modern firmware? That latest is 3.4 from what I remember on Gixxer's GitHub and the new stable release for duet is 3.46

                            Th0mpyundefined 1 Reply Last reply Reply Quote 0
                            • Th0mpyundefined
                              Th0mpy @VoodooBane
                              last edited by

                              @VoodooBane I don't know, I haven't seen them online for quite some time. It's pretty simple, however, to update and compile the firmware. To be honest it's been a hot minute since I touched it last.

                              I was looking around for someone else and either I sold them all or completely lost them in my shop 😄

                              I am considering a new order of them, if I get enough interest it would push my decision up a notch.

                              Usually the team that scores the most points wins the game.

                              1 Reply Last reply Reply Quote 0
                              • First post
                                Last post
                              Unless otherwise noted, all forum content is licensed under CC-BY-SA