WiFi to LAN/ETH
-
I would like to connect my NUC with Debian and WiFi to Mini5 ETH board.
How is this done the easiest way to get my Mini5 on same network 192.168.1 etc ?
-
Do you mean a direct ethernet connection between the PC and the Duet? Manually configure IP addresses for both.
This should get you started, though obviously would be different for Debian. https://docs.duet3d.com/en/User_manual/Machine_configuration/Networking#wired-direct-connection
If you wanted to reach the Duet from WIFI you would need to look into bridging the wifi and ethernet connections.
-
Use a wifi router is probably the easiest way. Connect nuc to wifi connect Duet to Eth.
-
@terabyte
Yes that is the way I run before I moved the printer, want to avoid looooooooooong cable. -
Bridging is a PITA
-
@tecno get an access point or a second router to act as an access point which will connect the Duet to WiFi.