Workbee with Rotary
-
Hi, we have a workbee with all the rotary hardware fitted, I’m guessing wiring to the original duet board is possible as it has a spare connection, my question is how do I configure the software to take the rotary does anyone know or is there a different duet board that will do this. I’m guessing I have to add code in there somewhere and would love if anyone has done this to share what they found, oh and please keep any answers clear as I’m not the most technical person in the world
-
@mae18 If you bought the rotary axis from Workbee, they should be able to help you with the wiring and configuration. Otherwise, we're going to need quite a lot of info:
- Duet hardware and firmware version - send M115 in the console and post response
- The config.g from the Duet
- A picture of the Duet, so we can see if you have a spare stepper driver (you should do)
Post code as text, preferably using the code tags in your reply (the </> symbol in the text styles panel above where you write your post) to make the code more readable, rather than posting screenshots of code. For example:
This is a code block
You can always edit your reply to get it looking right. This will help people help you!
Ian