Troubles connecting LIS3DH accelerometer
-
Hi,
I am trying to connect the ADAfruit LIS3DH triple-axis accelerometer, but am having issues with the graphs.
X;
Y:
The X looks to be connected correctly (x line significantly higer than Y and Z. However, with the Y measurement, it is all over the place.
Have I connected something incorrectly? These graphs look terrible
-
@SanderLPFRG following. I also have connected the accelerometer regarding the instructions, but I my graph is also not accurate. In X axis movement the highest graph is named Y axis...
-
@SanderLPFRG Also, have you figured it out how to do a move diagonally both directions?
-
@SanderLPFRG Make sure you have specified the correct sensor orientation. This is critical so the Duet knows which accelerometer axes match your printer axes.
Check the documentation here:
How to set the orientationand here:
https://docs.duet3d.com/User_manual/Reference/Gcodes#m955-configure-accelerometer
