magnetic filament sensor error
-
Hi, I am having difficulties with the magnetic filament sensor, I keep having this error:
I'm trying to print some pretty big parts on my 1m3 printer and I have this error every 20 layers or so still have 700 layers to go
here is my config file
config.gwhat should i do?
-
What firmware versions?
M591 D0 P3 C"121.io1.in" S1 E5 L26.62 R0:500;
-
i did send : M591 D0 P3 C"121.io1.in" S1 E5 L38.45 R0:900
after looking at the calibration -
Your firmware is a bit old and a release candidate. Please try updating your firmware by uploading this zip file.
https://github.com/Duet3D/RepRapFirmware/releases/download/3.4.6/Duet2and3Firmware-3.4.6.zip
-
@Phaedrux thank you,i just did the update, i will try to see if it help today on my next print