Flex Build Plate

gorf32

I am looking for a 365mm round flex build plate.

Has anyone seen any at this size, or is there a company that makes custom sizes in only one or two pieces.?

Or is there a way to cut one down without ruining it?.

Thanks Gary

o_lampe

@gorf32 I've built my own from 1mm thin FR2 and magnetic & ferro-sheets. You can find all of it online.
If I had to build a heated bed again, I'd skip the magnetic sheet and glue the FR2 right onto the cast-aluminum heat spreader.
This stuff holds PLA very well and the part just pops off after the bed temp drops around 5°. I rarely need the flex-stuff anymore.