Config Tool, Tools section, H3 not offered..
-
I'm in the process of upgrading my firmware from RepRap firmware V2 to V3. Having a few problems so decided to use the Config Tool to see what it would produce. When defining the tools and associating a Heater, the Config Tool is not offering H3 which I want to allocate to Tool 2.
My machine is a four tool CoreXY.
I defined the Heaters 0 to 4.
However Heater 3 is not being offered in the Tool section.
GitHub suggests posting here before reporting bug.
-
@St-Taw definitely looks like a bug in the config tool @chrishamm
I wouldn't be too worried though as it can easily be rectified by editing the config when its loaded on the machine.
The config tool is also going through a major rewrite -
@jay_s_uk Actually the config.g generated does have the H3 present in the M950 and M307.
As you say not a problem.
-
@St-Taw What browser are you using? Configuring it how you have, I see all the heaters (Firefox on MacOS):
Ian
-
@St-Taw It is also possible that an adblocker removes some items - I've encountered this before, too. Try to disable it if you're using one.
Btw I'm about to finish off the new configtool, I'm hoping to have a first beta ready by the end of this week.
-
I'm using firefox on Windows 10 and not aware of using any add blockers.
I tried in on MS Edge and H3 is still missing,
-
@St-Taw @chrishamm I managed to replicate this error. Setting the Z Probe to BLTouch on the Endstops page causes it! If you change it back to any other Z Probe, H3 appears. I guess BLTouch defaults to H3/PWM1, so hides it as an option on the tools page? Even though it's not sharing a heater with the PWM output set on the I/O Mapping page.
Ian
