Duet 3 6HC v1.02 - Wifi Module

[iDavidFeng]

@T3P3Tony where to buy the module?

[T3P3Tony]

@iDavidFeng for now we just have some prototypes. Please email sales@duet3d.com if you would like one.

[iDavidFeng]

@T3P3Tony is that open source hardware?haha

[oliof]

@iDavidFeng all released hardware by Duet is well documented on their github and available under an open source license. Unreleased prototypes may not, but you can find the source to the firmware on github as well ... so I guess there is a good chance you may be able to derive how to build a module yourself.

[iDavidFeng]

@oliof but I can not find which pin is used on wifi module

[NeoDue]

Just to know when I need to start looking for this part at the local resellers: Is there already a planned release date for this module?

[T3P3Tony]

@NeoDue planned for 01 May

[NeoDue]

@T3P3Tony Thanks a lot!

[elmoret]

In stock: https://www.filastruder.com/products/duet-wifi-module-for-duet-3-6hc-v1-02-or-later

[selva_tvi]

@T3P3Tony Hi, is it available with any UK or Asian resellers? We are from India and need to order two numbers.

I found it only in Filastruder. Or is it possible to order from you?

Thanks

[T3P3Tony]

@selva_tvi , I assume you have seen our list of resellers here:
https://www.duet3d.com/page/genuine-resellers

in stock in the UK:
https://e3d-online.com/products/duet-3-mainboard-6hc

EU (some examples, not complete list):

https://www.dhm-online.com/en/control-cards/4416-duet-3-mainboard-6hc-v102-motherboard-for-next-generation-3d-and-cnc-printers.html

https://nl.reprapworld.be/elektronica/electronische-3d-merken/duet3d/duet3d-controller-borden/duet-3-moederbord-6hc-v1-02/

https://www.dold-mechatronik.de/Duet-3-Mainboard-6HC_1

https://www.123-3d.nl/Duet3D-Duet-3-Mainboard-6HC-v1-02-origineel-i9559-t14808.html

https://www.3dmensionals.de/duet-3-main-board-6hc-v1-02-1235?category=527#attr=10114,10115

[T3P3Tony]

@selva_tvi apologies, it has just been pointed out to me you meant the wifi module.

please email sales@duet3d.com

[selva_tvi]

@T3P3Tony yeah sure. Thank you

[NeoDue]

@elmoret Thanks a lot, but thanks to Brexit I prefer to wait until the german resellers have it... less fuss with customs.