The prints just don't speed up

[Mike 1]

Hello,
I use a E3D tool changer. Core xy, Duet 2 Wifi with extension board V3.45 and use more or less the config from E3D.
Now everything seams to work in a basic way, but the prints are very slow.

Has someone an ideas why they do not speed up? Speed at toolchanges is very fast.

config(4).g

xyzCalibration_cube.gcode

I have a waring als well
Warning: Obsolete use of S parameter on G1 command. Use H parameter instead.

[Phaedrux]

M566 E2:2:2:2

Your extruder jerk values are incredibly low. Try increasing those to 2000

That warning is from your homing files. Homing is done with G1 H1 moves now and not G1 S1 moves. S1 is used for laser control now.

[Mike 1]

Fixed! Thanx!