Mellow 7" screen setup

tecno

@FLY
Looking forward to next version, hopefully very soon.

tecno

@dc42
What terminal emulator do you suggest to use in Linux/Ubuntu? I love Yat but need a good replacement to be used on my DWC PC with my printers.

Merry Xmas to you all!

tecno

Trying Cutecom but it will not open = Access Denied

tecno

Did dig out one of my old laptops W10 with YAT.

So my conclusion is that this 7" screen is useless on Delta as regards leveling screen.

oliof

@tecno Im not dc42 but I prefer minicom as serial console since it autoconnects as soon as the board comes up.

tecno

@oliof

Can not get minicom to work , same as Cute can not connect !

oliof

@tecno maybe a permissions problem, but for debugging Linux systems I'd need to charge (-:

tecno

@oliof

This one is for FREE

sudo usermod -a -G dialout username
sudo chmod a+rw /dev/ttyACM0

tecno

@FLY said in Mellow 7" screen setup:

@tecno In the next version, I will set a button to switch between circle and square. For multi-point leveling, you need to move the nozzle to the designated position first, and then press and hold the button for 3 seconds. There will be a prompt when it succeeds, and the system will automatically record the button xy coordinates

Any news on this subject??

tecno

@FLY

Any news / progress??

tecno

@FLY

Any progress on this matter ??