Sensorless homing fails

Mike 1

Hello,
I tried to make sensorless homing work on the x-axes, but it just crashes. What could be the reason?

Thanks a lot!
Mike

Phaedrux

Is it working on the Y axis?

Have you been through this? https://docs.duet3d.com/en/User_manual/Connecting_hardware/Sensors_stall_detection

Mike 1

@Phaedrux
No, y it is not working as well. But it uses other code, as I tried to implement the things from your link for the x-axis. So I think it is better to focus on x-axis. The hardware worked before I made a firmware update.

homey.g

Phaedrux

This is for an E3D tool changer?

Mike 1

@Phaedrux
Yes, it is a E3D tool changer. Core xy, Duet 2 Wifi with extension board.

Mike 1

@MIke-1

At least
M915 H200 X Y S3 R0 F0
was missing.

Issue is fixed