News on Servo Motors Duet3d

alil2096

Hi, at Formnext in Novmber, I saw the fantastic servo-motors from Duet..

Any news on the release date?

Today I'm using two Clearpath from Teknic, but I'm totaly unsatisfied..

T3P3Tony

@alil2096 we are progressing towards production but don't have a release date yet. Out of interest, which of the two lengths in the documentation this far, and brake/no brake would fit your use case best:

https://docs.duet3d.com/Duet3D_hardware/Duet_3_family/Duet_3_Motor_23CL

TLAS

@T3P3Tony
Not my post so I feel like I’m hijacking here…. But M23CL-76-2800 would be great, although I would need to double-check clearance.

I know I could make it myself…. but any plans to release an interface board? A 6 motor variant, and 3-motor variant would be nice!

TLAS

@T3P3Tony
And not that I’d really complain, but it’d be nice to have a ‘daisy chain’ version with in/out depending on the connector power ratings.

T3P3Tony

@TLAS like a tool distribution board, but for the motors? yes thats planned but not scheduled.

re, daisy chaining not directly on the motors.