Automatic turn off
-
I have a 3d printer in which I wish to turn off power automatically.. There are various posts but they are a minefield and I do not wish to damage anything... My machine has a contactor which is switched on, has a latching coil and switched off by interrupting this coils supply.
I use also simplify 3d in which I can place an M code in its end scripts to effectively activate an electronic relay to interrupt the contactor coil.
I need to know if I can use the P S on terminal and what else? Do I need to place anything in my config?
I appreciate someone guide me in this.
Many thanks in advance, -
@mendelevium
My apologies posted twice as I could not find my original post and thought I did not post... sorry... -
@mendelevium no worries i will lock this thread as the discussion is here:
https://forum.duet3d.com/topic/31678/powering-off-duet-wifi-via-an-m-code/5
-
undefined T3P3Tony locked this topic
