Solved Blank page from Duet Web Control
-
My printer has been working fine for months but suddenly Duet Web Control is just serving up a blank page.
I can ping the printer and I can print to it from Prusa Slicer but DWC won't come up.
I have tried it from multiple browsers and multiple computers.
The top of page banner says "Duet Web Control" so it's getting something.
I have tried rebooting the printer and it makes no difference.
Safari's developer mode is showing this:
-
-
@chrishamm You are correct regarding stand alone mode. It is a Duet2 Wifi. I'm not positive what version it's currently running but it's reasonably up to date.
I'll give your suggestion a try in a bit and report back. It's probably beyond time to do a backup and maybe switch to a new card anyway. I've been using this card since this Duet2 was new over 2 1/2 years ago.
-
@chrishamm That fixed it. SD Card failed. Fortunately I was able to get all the critical stuff off of it.
That is a good reminder to back it up more often.
It's running 3.4.2 but I'll upgrade it shortly.
-
-