Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    No ethernet connection after upgrade

    Scheduled Pinned Locked Moved
    Firmware installation
    2
    6
    215
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • xxexxundefined
      xxexx
      last edited by

      After a failed attempt to upgrade via DWC/Ethernet i did upgrade my duet 2 via DWC/USB:

      m115
      FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 3.4.5 ELECTRONICS: Duet Ethernet 1.02 or later FIRMWARE_DATE: 2022-11-30 19:36:12<LF>ok<LF>
      M552 S1 P0.0.0.0
      ok<LF>Network running, IP address = 192.168.178.58<LF>

      and DWC via USB runs perfectly.

      But now i am unable to connect to DWC via ethernet - the 5V led is lit, but the ethernet connectivity leds are not blinking (as they are with USB connected).

      droftartsundefined 1 Reply Last reply Reply Quote 0
      • droftartsundefined
        droftarts administrators @xxexx
        last edited by

        @xxexx You made a new thread? What was wrong with the old one?!
        https://forum.duet3d.com/topic/31153/duet-2-ethernet-no-ethernet-after-firmware-upgrade/
        Please don't make multiple threads for the same issue. If you feel it should be in a different category, it can be moved on request, if you can't.

        Ian

        Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

        xxexxundefined 2 Replies Last reply Reply Quote 0
        • xxexxundefined
          xxexx @droftarts
          last edited by

          @droftarts

          i dont get any more answers in the general thread so now i try in the Firmware thread. I did now delete the other thread.

          xxexxundefined 1 Reply Last reply Reply Quote 0
          • xxexxundefined
            xxexx @xxexx
            last edited by

            This post is deleted!
            1 Reply Last reply Reply Quote 0
            • xxexxundefined
              xxexx @droftarts
              last edited by

              @droftarts So what do im do now?

              droftartsundefined 1 Reply Last reply Reply Quote 0
              • droftartsundefined
                droftarts administrators @xxexx
                last edited by

                @xxexx see the old thread where I replied. I'm locking this one.

                Ian

                Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

                1 Reply Last reply Reply Quote 0
                • droftartsundefined droftarts locked this topic
                • First post
                  Last post
                Unless otherwise noted, all forum content is licensed under CC-BY-SA