Highmap problems
-
Hi everybody,
I've a duet 3d Wifi with a Pinda probe and the following command in the config file:
; Z-Probe
M558 P1 C"zprobe.in" H5 R0.5 A1 B1 F300 T9000 ; set Z probe type to unmodulated and the dive height + speeds
G31 P500 X0 Y-18 Z0.585 ; set Z probe trigger value, offset and trigger height
M557 X20:220 Y20:180 S20 ; define mesh gridI've deleted the latest highmap, did a M561 and have done the normal probe procedure as described in the wiki. Everytime when I do an G29 S0 command, i reveive the following result:
The printer is an upgraded version of the original Ender 3 Pro, now used as CoreXZ. the Bed is a "changesystem based " magnetic bed with a (sorry I don't know the correct english word) "infinite printing surface" so called filaprint.
Board:
Board: Duet 2 WiFi (2WiFi)
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.4.4 (2022-10-20)
Version von Duet WiFi Server: 1.27What can I do?
-
@Pascal-0 I've got the same build surface on my Ender 3 Pro and it works great. It looks like your bed is just misaligned, so try to level your bed. I haven't changed mine to CoreXZ, though.