SuperSlicer print speed
-
I have sliced a model with SuperSlicer and I am looking at speeds. On the first layer, the skirt is printing at 50% the speed of the first layer but I have all speeds set to 100 mm/sec. Why is there a limit on the skirt speed? Volumetric limits are disabled (hence the first layer of the model prints at full speed). Where else could there be a limit on the skirt speed?
-
probably a bug. Does PrusaSlicer behave the same?
-
@Phaedrux Don't know about PrusaSlicer but I will look into it, thanks