Bed Heater PID Tune Warning.
-
Hi Guys,
I've just ran a 2nd bed pid tune and recieved the following warning. The heater and bed is still the original Tronxy X5SA Pro 330 x 330;
Is this anything to be concerned about? -
@Dizzwold you'll probably be ok. Just run with those values and see if you get any heater faults
-
What did the graph look like during tuning?
-
This post is deleted! -
@Phaedrux
I don't actually remember, I don't remember seeing anything unusual.May be best to do it again, also if you look at my bed compensation in the following thread;
https://forum.duet3d.com/topic/30383/twin-z-axis-motors-and-mbla/9?_=1668068238105