Z seam blobs, pause at layer change
-
Re: [Trying to remove blobs](what order to change things)
Hello all.
I am getting significant blobs at layer changes on the Z seam of every print.
This only happens on my Ender6 with the Duet mini5+. My Prusa doesn’t do this.
Both printers have the same Bondtech direct drive extruders and Slice Engineering hot ends.
I’m using Prusa slicer, but I have also tested Cura 5.xMy printer pauses ever so slightly at each layer change.
I have attempted to adjust retraction, coasting and other settings, but the pause is the primary issue.
Has anyone else had this problem?
Do you have ideas to solve it?Thanks!
-
Post your config.g.
I would guess that your Z axis is set to a very slow speed, so it's slow to change layers. Perhaps your extruder is also set slow.
Sharing a sliced gcode file would be helpful as well.
-
@Phaedrux
Yo Phaedrux!
He posted the same thing here (link) and I tried to answer him... let see if he will solve the problem:
https://forum.duet3d.com/topic/14846/strange-blobbing-on-layer-change/32ps:
i'm restoring a CNC for build some part for the full metal CoreXY high temp I'm assembling... That will be a very fine piece of hardware
Soon as possible I'll post stuffs
-
Hey guys, thanks for responding.
Yes, I did post 2x. Sorry, I found the older post after continuing my search after I posted.
The g-code is 7.3mb. Not sure how to get it to you. Please advise and I'll send it.
@Phaedrux , when you say my Z axis speed it slow, is that in the Duet config or in my slicer settings that you're referring to? Or maybe both?
-
@davidewen said in Z seam blobs, pause at layer change:
Please advise and I'll send it.
Perhaps slice a smaller object.
