Folder structure in DWC for Filament profiles

[CabalSoul]

I'm using the Filament profiles while they are very useful there is a slight annoyance if you have many of them.
I'm setting PA , Retraction, Nozzle Diameter, Temperature and Hotend type (Rapido HF vs UHF)

The Problem is i that I have to name my Profiles like this:
0.4 UHF PETG
0.4 HF PETG
0.8 UHF PETG etc.

Because the Settings change depending on the material, nozzle and Hotend type, it gets a little bit overwhelming.

It would be really nice to have them organized in Folders for a better overview.

[CabalSoul]

NVM I'm using Macros to set Flags for Nozzle size and Hotendtype and conditional Gcodes in the filament config.
I think it's more intuitive I can rename the Printer with

M550  P"Apex Pedator 0.4 HF PETG"

to make sure the correct settings are loaded